Average Reviews:
(More customer reviews)Summary: A good low-end manual coffee grinder
Update December 2009: After use multiple times per day this grinder is still working as well as the day it was new. The only work I have done on it was to add a nylon washer at the base of the adjustment mechanism to stop the noise of metal on metal sliding contact which developed after a couple of months.
Assembly: The grinder came in a nearly assembled state; assembly consisted of removing the top thumbscrew, placing the handle on the grinder shaft, and replacing the top thumbscrew. Total time: about 10 seconds
Construction: The actual grinder assembly appears to be of cast iron with a tapered burr rotating inside a stationary sleeve. The handle, bowl, and support / adjustment mechanism are of stamped steel. The burr and handle are connected by a steel shaft. The housing is made of painted hardboard. The drawer is made of unpainted hardboard.
Grind Adjustment: The coarse to fine adjustment of the grind is accomplished by loosening the handle, then holding the shaft while turning an adjustment washer. This moves the burr up or down within the sleeve and closes or opens the passage area (a larger passage = coarser grind).
Initial setup: Add some coffee beans to the bowl and turn the handle 10 - 20 revolutions. Remove the drawer and assess the grind characteristics. If it is too fine or too coarse for your purpose, adjust as required and repeat until it is as desired. The grinder is now ready to use.
Normal usage: Add coffee beans to the bowl and turn the handle to grind, then remove the drawer and remove the ground coffee. At the fairly fine setting I prefer, it takes around 40 turns of the handle to grind enough coffee beans for a strong cup.
Conclusion: Make no mistake - this is close to the bottom end of the manual coffee grinder scale and certainly won't win you any bonus points with those who want a coffee grinder as a status symbol. The drawer is a bit disappointing in terms of it's size (small) and material(bare hardboard) but for one or two cups worth of grounds it is sufficent, and I would not want to use this for grinding coffee for more than one or two cups at a time. On the other hand, you put coffee beans in, turn the crank, and they come out ground the way you want them. At it's price it does what I ask of it.
Click Here to see more reviews about: Norpro Coffee Grinder
This classic grinder features adjustable settings from fine to coarse. It is easy to operate. Just put the coffee beans inside of bowl, steer the handle and ground coffee falls inside of the drawer. It is not only functional but decorative. .
Get 7% OFF
No comments:
Post a Comment